Check your IELTS writing task 1 and essay, this is a free correction and evaluation service.
Check IELTS Writing it's free
British CouncilIDPCambridge
IELTS Writing Answer Sheet
Barcode 3
Candidate Name:
Jazib Saher
Center Number:
1
2
3
4
   
Candidate Number:
1
6
0
2
3
Module (shade one box):
Academic:
 
General Training:
Test Date:
1
D
2
D
   
1
M
2
M
   
2
Y
0
Y
2
Y
0
Y

The diagram gives information about the process for making pulp and paper.

The diagram gives information about the process for making pulp and paper. WkD
The diagram illustrates the way in which pulp and paper are made. Overall, trees pass through six stages before being ready for starting making paper for boxes and paper for printing. While the process of making pulp uses six tools, the production of paper for bales requires five stages of using tools and paper for print six stages. In the first stage, trees turn into logs. These timbers are then chipped and crushed down into purchased chips before passing into a digester. The resulting mixture is washed in order to remove excess trash. The final product is afterwards going to the pulp screen. And on this note, the production of pulp ends. Regarding the next step, the substandard pulp goes to the production of rough paper for boxes. Firstly, this type of pulp is going to the pulp former and then to the pulp dryer. In the third stage, the already dried pulp turns into the pulp roll. Finally, these rolls are cut by cutters to the required dimensions, then they are formed into paper boxes. In the last stage, the high-quality pulp is going to the pulp cleaner one more time, then it goes to the pulp dryer. After that when the pulp fully dried it goes to the pulp press and then immediately to the paper presser. In a final level, the pressed paper goes to the dryer and from there it packaged into the rolls of paper.
The diagram illustrates the way in which pulp and paper
are made
.
Overall
, trees pass through six
stages
before
being ready for starting making paper for boxes and paper for printing. While the process of making pulp
uses
six tools, the production of paper for bales requires five
stages
of using tools and paper for print six stages. In the
first
stage
, trees turn into logs. These timbers are then chipped and crushed down into
purchased
chips
before
passing into a digester. The resulting mixture
is washed
in order to remove excess trash. The final product is afterwards going to the pulp screen. And on this note, the production of pulp ends. Regarding the
next
step, the substandard pulp goes to the production of rough paper for boxes.
Firstly
, this type of pulp is going to the pulp former and then to the pulp dryer. In the third
stage
, the already dried pulp turns into the pulp roll.
Finally
, these rolls are
cut
by cutters to the required dimensions, then they
are formed
into paper boxes. In the last
stage
, the high-quality pulp is going to the pulp cleaner one more time, then it goes to the pulp dryer. After that when the pulp
fully
dried it goes to the pulp press and then immediately to the paper presser. In a final level, the pressed paper goes to the dryer and from there it packaged into the rolls of paper.
Do not write below this line
Official use only
CC
7.0
LR
6.0
GR
6.5
TA
7.0
OVERALL BAND SCORE
6.5
Barcode 1
Barcode 1

IELTS academic The diagram gives information about the process for making pulp and paper.

👍 High Quality Evaluation

Correction made by newly developed AI

✅ Check your Writing

Paste/write text, get result

⭐ Writing Ideas

Free for everyone

⚡ Comprehensive report

Analysis of your text

⌛ Instant feedback

Get report in less than a second

Recent posts